Recipe: Venison Prosciutto & Pheasant Salami

PUBLISHED: 20:54 14 September 2020

one for the pot 
charcuterie

one for the pot charcuterie

Archant

The Game for Anything crew present two delicious cured meat recipes for you to try at home with no special kit - venison prosciutto and pheasant salami!

one for the pot 
charcuterieone for the pot charcuterie

As we have often talked about, at Game for Anything we are always trying to find new ways to use game – and one of our favourite ways is in charcuterie.

The summer months can be a great time to do some experimenting with different processes because of the increased temperatures, but remember to keep any hanging meats out of direct sunlight and ensure they get plenty of airflow passing over them. The air movement is an important part so if you have garage or shed where you can leave a window and door open at either end, this will work well.

There are so many variations when it comes to charcuterie, whether it’s the country or region the recipe has come from, the cut, or the meat itself... the options are endless.

This month, we have chosen venison prosciutto and pheasant salami. While there are lots of techniques for drying meat that can be made in just a few hours (such as the one used to make biltong), many recipes require time to cure and develop flavour.

Sometimes, the idea of making charcuterie can feel a bit scary, as you are not cooking the meat, just allowing it to dry and cure. Due to the fact that there is a plentiful, inexpensive supply of game meat throughout the year, we encourage you to give it a go and if it does goes wrong, you’re not too much out of pocket.

Even here in the GFA kitchen, we have had some attempts that have not been successful. Best advice is to trust your nose. If it doesn’t smell right, don’t eat it.

one for the pot 
charcuterieone for the pot charcuterie

Venison Prosciutto - Ingredients

* 2-3kg haunch of roe deer

* 10kg PDV curing salt

* 20ml malt vinegar

one for the pot 
charcuterieone for the pot charcuterie

VENISON PROSCIUTTO - Method

1. Trim any loose bits of fat and flesh off the venison

2. Weigh the haunch

3. Using a wooden or plastic box, pour in about 4cm of PDV curing salt (this can be bought on Amazon.co.uk, but I would recommend popping to your local Chinese supermarket as it is usually really cheap there)

4. Lay the haunch on top of the salt, and arrange it so there is at least a 4cm gap from the edges of the box

5. Pour over more PDV salt to completely cover and ensure there is about 4cm covering the top of the joint

6. Place the box in a cool, dark place

7. Lay a wooden board on top of the salt and then put a heavy weight on top of that (spare bag of salt is perfect for this)

8. It should be left in the salt for three days per kg (i.e. 3kg leave for nine days)

one for the pot 
charcuterieone for the pot charcuterie

9. At the end of the cure, remove the haunch and dispose of the salt

10. Rinse off with cold water and pat dry with a teatowel

11. Weigh again at this stage

12. Using a cloth, rub the whole joint with malt vinegar

13. Now place the joint in a muslin or jambon bag; this is to keep flies off, so not so important during winter

14. Place the haunch on a meat hook in a cool place, out of direct sunlight where there is air movement

Tip. The air movement is the important part so if you have a garage or shed where you can leave a window and door open this will work well

15. Don’t allow the temperature to get over 23°C

16. Leave for 2-3 months (the target is to lose 30% of the weight after it comes out of the salt, i.e. 3kg after curing should be 2.1kg finished weight)

You may also want to watch:

Pheasant Salami (makes 10) - Ingredients

* 2kg minced pheasant breast and leg meat

* 1kg minced pork belly ensuring the rind has been removed AND 500g pork back fat in 1cm cubes (this can be bought from your local butcher)

* 20g fennel seeds

* 2 cloves of garlic

* Beef middle casings (these can be purchased online)

* 50g cracked black pepper

* 60g PDV curing salt

* 150ml port

PHEASANT SALAMI - Method

1. Wash the salt thoroughly off the beef casings

2. Place in warm water for three to four hours before you are ready

3. Lightly toast the fennel seeds in a dry frying pan

4. Crush the garlic clove

5. Place all the ingredients into a larger mixing bowl and work together with your hands

6. Load the mix into the sausage filler and then place beef casings on the filling nozzle

7. Feed out some of the meat mixture then tie a piece of string around the beef casing, flip over the end of the beef casing and tie a second knot over the top of this (use the string to form a loop that can be used to hang later)

8. Feed out the sausage meat to form a salami about 20-25cm long

9. Pull forward to give some spare casing

10. Cut the casing and tie off at the bottom of the salami, flip over the casting again and tie a second knot

11. Repeat until all the meat is used

12. They should initially be hung somewhere about 20-25°C for 24 hours for the skins to harden and bacteria to form

13. After that, hang them out of direct sunlight but with air movement

14. You are looking for a temperature of 12-18°C and humidity of about 70%

15. Hang for about 6-8 weeks

Latest from the Sporting Shooter